<div dir="ltr">In my previous incarnation we ran into a similar issue but in reverse. 
We had more data coming IN than our T-1 cared for.  It was slowing down
important out-bound traffic such as payroll (accounting servers were
located in some remote portion of Borneo I think).  We implemented a
band-aid solution at the time.  We purchased a router capable of using
2 T-1 lines and "balanced" some of our load over them.  Basically we
reserved T-1a for sales and accounting traffic and T-1b for "web"
traffic.  We did use a few cable modems for certain applications.  The
place a cable modem was a good idea (and proved reliable) was for
incoming traffic.  Since most home broadband configurations are heavy
on download "speeds" and minimal in the upload department, cable modems
were ideal for traffic cams and such.<br>
<br>The ultimate solution came when Buckeye TeleSystems started
offering Metropolitan Ethernet.  Then, we hooked up a big ol' 10MB
Ethernet connection.  The cable modems are still in place for the most
part, because they seem to be doing the job that they were asked to do.<br>
<br>2¢<br><br>Bill<br><br><br>Bill Hardison<br>Computer Services Coordinator<br>Northwest Regional Library System (NORWELD)<br>419-352-2903</div>