[OPLINTECH] Who will offer a strategy for printing labels (1"x1", spine) to be applied to dust jacket prior to lamination

[Tim Burns]

Who will offer a strategy for printing labels (1"x1", spine) to be applied to dust jacket prior to lamination ?

We currently print from Sirsi to foil-backed-tractor-fed stock through (Panasonic) dot-matrix printer (connection is parallel.)

Some concern about efficient support of this system … (ie. parallel, dot-matrix, laminating)

Issues - laser printing presents “heat” issues, as does thermal stock.

Potential solutions include ink-based desktop mini printer (Dymo?), alternately, apply the label after lamination.

Tim Burns, Technologist
Birchard Public Library of Sandusky County Ohio
Department of Nuts and Bots
tim.burns at birchard.lib.oh.us<mailto:tim.burns at birchard.lib.oh.us>
telephone: (419) 334-7101 extension: 239



NOTICE: This e-mail message and all attachments transmitted with it are intended solely for the use of the addressees and may contain legally privileged, protected or confidential information. If you have received this message in error, and/or you are not the intended recipient, please notify the sender immediately by e-mail reply and please delete this message from your computer and destroy any copies. Any unauthorized use, reproduction, forwarding, distribution, or other dissemination of this transmission is strictly prohibited and may be unlawful.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.oplin.org/pipermail/oplintech/attachments/20150721/60cefebc/attachment.html>