[OPLINTECH] public workstation

[Chad Neeper]

Interesting. We've actually had the exact *opposite* observation at the
libraries I support. We've actually found a distinct *lack* of CD/DVD-ROM
drive use at the patron computers....so much so, that a couple of years ago
I simply stopped putting them into the computers in favor of one or two
external USB DVD-ROM drive(s) kept at the circ desk for the rare times a
patron actually needs one.

It just goes to show the every community is different and you have to
provide for your own community's needs!

As for the usb/audio issue, I often will use a weighted USB dock and audio
extender cables to put those ports in a convenient place for patron use.
Sometimes the cables are permanently secured to the desk for ease of use.
It also greatly reduces wear and tear on the computer itself. Replacing an
audio or USB cable is a lot cheaper and easier than fixing the same port on
the computer itself.

2 cents,
Chad


______________________________
*Chad Neeper*
Senior Systems Engineer

*Level 9 Networks*
740-548-8070 (voice)
866-214-6607 (fax)

*Full IT/Computer consulting services -- Specialized in libraries and
schools*

On Fri, Jul 15, 2016 at 1:37 PM, Jessica D. Dooley <
dooleyje at adamscolibrary.org> wrote:

> One more thought about ultra-SFF public workstations and patron use cases:
> I still see a surprisingly high number of patrons using the CD/DVD drive.
> While a few are using the drive to access old material, I daily see adults
> and kids check out a DVD or CD, then sit down and watch/listen (with
> earbuds) on a public computer. In 2016, we’ve had several dozen patrons who
> use public computers to open and view current medical diagnostic scans that
> their physician has provided to them only on a CD. Many patrons need easy
> access to connect USB devices (from memory sticks to Garmins, tablets,
> phones, and more), and everyone uses earbuds. While I like the idea of
> VESA-mounting an SFF unit to monitors, all these observed patron use cases
> tend to make me prefer a small or medium form factor, with a disc drive,
> that patrons can easily see and reach without reaching behind the monitor.
> Just a thought –
>
>
>
> Jessica D. Dooley
>
> IT Specialist
>
> Adams County Public Library
>
> 937-587-2085
>
> dooleyje at adamscolibrary.org
>
>
>
> *From:* Chad Neeper [mailto:cneeper at level9networks.com]
> *Sent:* Thursday, July 14, 2016 3:44 PM
> *Cc:* OPLINTECH
> *Subject:* Re: [OPLINTECH] public workstation
>
>
>
> I've been using the following Intel NUC for custom-built mini computers.
> They're really simple to put together...you have to unscrew four screws,
> snap in the M.2 SSD and SO-DIMM, and install Windows.
>
>
>
>
>
> Intel NUC Core i5 6260Y 1.8GHz Dual Core CPU (m/n: NUC6i5SYK
> <http://www.intel.com/content/www/us/en/nuc/nuc-kit-nuc6i5syk.html>)
>
> Kingston 8GB PC4-17000 2133MHz DDR4 SO-DIMM
>
> Intel M.2 2280 SSD, 180GB
>
> Microsnot Windows 10 Pro OEM
>
>
>
>
>
> I think my cost for all the parts might hover around $670. Retail might
> cost a little more unless you're careful about sourcing. They're really
> snappy for a 4-inch square computer hanging on the back of the LCD.
>
>
>
>
>
>
> ______________________________
> *Chad Neeper*
> Senior Systems Engineer
>
> *Level 9 Networks*
> 740-548-8070 (voice)
> 866-214-6607 (fax)
>
> *Full IT/Computer consulting services -- Specialized in libraries and
> schools*
>
>
>
> On Thu, Jul 14, 2016 at 1:02 PM, Chris Krumnow <
> ckrumnow at defiancelibrary.org> wrote:
>
> Tim,
>
>
>
> Below is a link to the sff that I had on my list to get in the fall. Since
> "expensive" is relative, the price is less than $500. We've ordered from
> CDWG for a long time. We choose not to build our own computers.
>
>
>
>
> https://www.cdwg.com/shop/products/HP-ProDesk-400-G2-Core-i5-6500T-2.5-GHz-4-GB-128-GB/4141140.aspx?pfm=srh
>
>
>
>
>
>
> Thanks,
>
> Chris Krumnow
>
> IT Specialist
>
> Defiance Public Library System
>
> Work:419-782-1456
>
> Cell: 419-956-2767
>
> defiancelibrary.org
>
>
>
> On Thu, Jul 14, 2016 at 12:30 PM, Tim Burns <tim.burns at birchard.lib.oh.us>
> wrote:
>
> Thanks for responding! I would consider the SFF - can you suggest
> specifics? (model, vendor) The ones I found are expensive.
> Tb
>
> > From: Chad Neeper <cneeper at level9networks.com>
> >
> > +1 on everything Joe said.
> >
> > To expound on his "First", if space IS an issue (or even if it isn't),
> you
> > might consider an ultra small form factor computer that hangs on the VESA
> > mount on the back of probably all LCDs. I've started using the Intel NUCs
> > myself, but there are others. The Intel NUCs are about 4"x4"x2" in
> > dimension.
> >
> > Using the VESA mount and an ultra SFF computer, you achieve the
> all-in-one
> > at a lower cost and with greater flexibility.
> >
> > 2 cents,
> > Chad
> >
>
>
> NOTICE: This e-mail message and all attachments transmitted with it are
> intended solely for the use of the addressees and may contain legally
> privileged, protected or confidential information. If you have received
> this message in error, and/or you are not the intended recipient, please
> notify the sender immediately by e-mail reply and please delete this
> message from your computer and destroy any copies. Any unauthorized use,
> reproduction, forwarding, distribution, or other dissemination of this
> transmission is strictly prohibited and may be unlawful.
> _______________________________________________
> OPLINTECH mailing list
> OPLINTECH at lists.oplin.org
> http://lists.oplin.org/mailman/listinfo/oplintech
>
>
>
>
> _______________________________________________
> OPLINTECH mailing list
> OPLINTECH at lists.oplin.org
> http://lists.oplin.org/mailman/listinfo/oplintech
>
>
>
> _______________________________________________
> OPLINTECH mailing list
> OPLINTECH at lists.oplin.org
> http://lists.oplin.org/mailman/listinfo/oplintech
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.oplin.org/pipermail/oplintech/attachments/20160715/e925450b/attachment-0001.html>